Need help?Do you have a question about the Johannus DSA-4 and is the answer not in the manual?
Acoustic System| voltage | 230V (110V) |
|---|---|
| frequency | 50 Hz (60 Hz) |
| max supplied power | 120Watt |
| max power per channel | 20Watt |
| impedance per channel | 8Ù |
| input impedance | 1MÙ |
| input level | -10dBV tot +4dBV |
| input level max | +10dBV |
| frequency range | 20Hz till 20.000Hz (± 1dB) |
| dimensions | 21, 6 x 13, 2 x 19, 3cm (8.1" x 5.2" x 7.6") |
| weight | 3, 5kg ( 7.7lbs) |
Loudspeaker Boxes| system | 2-way |
|---|---|
| impedance | 8Ù |
| power nominal | 50Watt |
| power max | 100Watt |
| frequency range | 29Hz till 22.000Hz |
| dimensions | 24, 1 x 39, 1 x 22, 0 cm (9.5"x15.4"x8.7") |
| weight | 4, 6kg ( 10 lbs) |
Instructions for preparing loudspeaker cables, including cutting, splitting ends, and stripping wires for connection.
Instructions for checking voltage compatibility, connecting the power cord, and grounding the acoustic system.
Details all controls on the DSA-4 front panel, including switch, LED indicator, and rotary controls for level, mix, and program.
Details how to use the INPUT rotary control to adjust the input signal level for optimal LED indication.
Explains the MIX rotary control for balancing the direct (dry) signal and the reverb (wet) acoustic signal.
Describes the OUTPUT rotary control used to adjust the overall volume of the acoustic system's output channels.
To Next Page