User’s Manual Digital Stereo Acoustics DSA-4
JOHANNUSJOHANNUS
8
Adjusting the output signal level
With the rotary control OUTPUT you can adjust the volume of the output signal of the acoustic
system. This means the signal from the MIX control containing direct and reverb signal
depending on the adjustment of the MIX rotary control.
This control adjusts all four output channels at the same time.
Program switch
With the program switch you can make a choice of sixteen available acoustical programs.
Here follows a brief description of the sixteen programs.
1. Large concert hall with a bright response
2. Large concert hall with a mellow response
3. Mid-size concert hall
4. Mid-size studio
5. Small studio
6. Studio with a mellow response
7. Repeatative decaying reverb effect
8. Plate Reverb with a bright response
9. Plate Reverb with a mellow response
10. Plate Reverb
11. Slow tremolo effect
12. Deep chorus effect
13. Delayed signal effect
14. Chorus effect in a large room
15. Chorus effect in a large room including a delayed signal effect
16. Chorus effect as occurring in rotating speaker systems
To Next Page
Loading...
Need help?
Acoustic System