User’s Manual Digital Stereo Acoustics DSA-4
JOHANNUSJOHANNUS
9
Program
With the rotary control ADJUST you can change one parameter of the program selected with
the switch. This will magnify or weaken the effect of the program you have chosen.
Here follows the adjustment you can make on the selected program.
Program 1. Reverb length
Program 2. Reverb length
Program 3. Reverb length
Program 4. Reverb length
Program 5. Reverb length
Program 6. Reverb length
Program 7. Effect of repetition
Program 8. Reverb length
Program 9. Reverb length
Program 10. Reverb length
Program 11. Tremolo depth
Program 12. chorus effect depth
Program 13. Delay time
Program 14. Reverb length
Program 15. Delay time
Program 16. Speed of rotation
Power switch
With the power switch you can switch the acoustic system on and off. When the acoustic system
is on the red light in the power switch will light up.
To avoid a ‘plop’ through the loudspeakers of the DSA-4 please first switch on the attached
devices, like an organ or other devices like a Hifi-equipment, before switching on the acoustic
system.
To Next Page
Loading...
Need help?
Acoustic System