Johannus Studio 260 User Manual

User Manual Studio 260 / 360 / P-360
12
2 INSTALLATION
2.1 Installation and connection
2.1.1 Studio P-360
1. Place the organ onto a sturdy, level surface.
2. Lean the organ slightly backwards.
3. Install the pedal board (C), see § 2.1.4.
4. Set the organ upright.
5. Place the organ bench (B) over the pedal board.
6. Ensure that the voltage rating on the serial plate of the organ matches the
mains voltage in the building. Look for the serial plate (A).
7. When a power cord plug is fitted with an earth pin: Make sure to connect to
a mains socket outlet with a protective earthing connection.
A
B
C
Shown model: Studio P-360

Johannus Studio 260 Specifications

General

Brand	Johannus
Model	Studio 260
Category	Musical Instrument
Language	English