John Guest JG TM4 - Normal Run Mode; Setting the Clock; Programming a Holiday

3
Normal Run Mode
In normal run mode, the time clock will display the current time. It
can also be set to show the status for a particular zone. To display
the status of a zone, press Zone 1 – Zone 4. This screen will be
displayed until you press Done and return to the main menu.
Setting the Clock
The time clock has a 24 hour clock. To set the clock, follow the
steps:
• From the main menu, press Clock.
• Use the up and down arrow keys to set the hour.
• Use the up and down arrow keys to set the minute.
• Press Day repeatedly to set the day of the week.
• Press Done to store.
Programming a Holiday
The time clock can be programmed to switch all zones off for a
set number of days - ideal for when you are going away. To use
the holiday function, follow these steps:
• From the main menu, press Holiday.
• Select the number of days you are going away for. The
holiday will start immediately, but will count tomorrow as the
rst day.