John Guest JG TM4 - Copy Function; Mode Select

• Press Off, and set the Off time.
• Repeat for Time 2 – Time 4.
• Press Done.
Copy Function
The Time clock has a copy function, enabling you to copy
switching times from one zone to another.
To use the Copy function, follow these steps:
• Select the zone and press Edit.
• Press Copy.
• Select each zone you want to copy to and press Done.
Mode Select
Each zone can operate in 3 modes.
Auto: The zone will work to the programmed switching times.
Off: The zone will switch off completely.
Constant: The zone will stay on indenitely.
To set the mode for the zone, follow these steps:
• Select the zone you wish to program, for example Zone 1.
• Repeatedly press Mode until the desired mode is displayed.
• Press Done.
5