• To cancel the holiday early, reduce the holiday days to 00
and press Done.
Selecting 5/2 Day or 7 Day Programming
Each zone can be programmed to work in 5/2 (Weekday/
Weekend) or 7 Day mode. To setup the required mode, follow
these steps:
• Press Zone 1.
• Press Day.
• Set 00 to work in 5/2 day mode.
• Set 01 to work in 7 day mode.
• Press Done.
Adjusting the Switching Times
Each zone has 4 On/Off times.
Follow these steps to program the switching times:
• Select the zone you wish to program, for example Zone 1.
• Press Edit.
• If the zone is operating in 5/2 day mode, you will see Mon,
Tue, Wed, Thu, Fri on the display. If it is operating in 7 day
mode, you will see Mon.
• Press Day to select the day to program.
• You can now set the On time by using the Up/Down key.
4
To Next Page
Loading...