John Lewis 803/46203 User Manual

Milan Bed
PRE-ASSEMBLY PREPARATION
Please check the pack contents before attempting to assemble this product. A full checklist of components is
given in this leaflet. If any components are missing, please contact the John Lewis Helpline.
This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE WHEN
LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 40 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembly.
If you require any additional information or have any issues with this product please call the
John Lewis Helpline on 01244 689949 or e-mail mail@fwgroup-uk.com
Small double choc - 803/45906
Small double ivory - 803/46203
Double choc - 803/45902
Double ivory - 803/46204
John Lewis
For product support or spare parts please call
the John Lewis Helpline:
T: 01244 689949
E: mail@fwgroup-uk.com
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools
Thank you for purchasing this Milan bed. Please read the instructions carefully before use to ensure
safe and satisfactory operation of this product.
1/6
Double black - 803/46101
King choc - 803/45903
King ivory - 803/46205
King black - 803/46102

John Lewis 803/46203 Specifications

General

Brand	John Lewis
Model	803/46203
Category	Indoor Furnishing
Language	English

Summary

Product Information and Support

John Lewis Helpline

Provides contact number and email for product support and spare parts.

Pre-Assembly Preparation

Necessary Tools

Lists essential tools required for assembly.

Assembly Instructions

Step One: Attach Legs

Securing wooden legs to the headboard and footboard using M6 bolts.

Step Two: Attach Side Rails

Loosely attaching side rails to headboard/footboard with pre-inserted bolts.

Step Three: Secure Centre Rail and Tighten Fixings

Installing the centre rail and tightening all previously loosely attached bolts.

Step Four: Attach Slats

Fixing the bed slats to the side and centre rails using plastic caps.

Step Five: Final Check

Confirmation that the bed assembly is complete and ready for use.

Care and Maintenance

Safety Instructions