2
Thank you for purchasing this Anna cot. Please read the instructions and warnings carefully
before use to ensure safe and satisfactory operation of this product.
Your child’s safety is your responsibility. If you have a query with this product or require
replacement parts, please contact your nearest John Lewis department store.
Lay out the parts on a soft level surface and compare to the part and fixings checklist on page 2.
Do not discard any packaging until you are sure that you have all the parts.
Keep children clear during assembly as pack contains small parts which may present a choking
hazard.
Recommended mattress: 60 x 120cm
This product complies with BS EN 716-1&2:2008 + A1:2013
Fixings
Parts
Bolt (6.3 x 50mm) x 4
1
2
3
4
Assembly dowel x 4
5
You will need:
1 x Cross-headed screwdriver
1 x Flat-headed screwdriver
1 x Allen key (supplied)
Cot end x 2
A
Fixed side x 1
B
Drop side x 1
C
Mattress base x 1
D
Crossbeam x 1
E
Wooden dowel x 2
Bolt (6.3 x 55mm) x 2
Barrel nut x 2
To Next Page
Loading...
