To Next PageTo Next Page
Need help?Do you have a question about the John Lewis Ashton Bunk Bed Bed and is the answer not in the manual?
General| Type | Bunk Bed |
|---|---|
| Assembly Required | Yes |
| Material | Pine |
| Bed Size | Single |
| Safety Features | Guard rails on upper bunk, sturdy ladder |
Contact John Lewis for product support or spare parts via phone or email.
Ensure all instructions are read in full before starting assembly.
Details necessary tools, handling precautions, assembly time, and warnings about small parts.
List of hardware items including Allen key, bolts, nuts, and screws.
List of bed parts such as headboards, guard rails, ladder parts, and slats.
Connect bottom side rails to headboard bottoms using barrel nuts, bolts, and Allen key.
Attach the first and remaining slats using screws, ensuring no gaps.
Connect top side rails to headboard tops using barrel nuts, bolts, and Allen key.
Attach the first and remaining slats to the top half using screws.
Connect the upper bed to the bottom bed using steel pins in the corner posts.
Attach ladder horizontals to ladder parts using bolts and Allen key.
Insert dowels into guard rails and attach them to side rails.
Secure guard rails to headboard tops using bolts and Allen key.
Connect the assembled ladder unit to the guard rail and side rails using bolts.
Explains wood grain patterns, veneers, and natural colour changes over time.
Advice on dusting, waxing, avoiding spray polishes, and heat sources.
Covers lifting, checking fixings, handling, assembly by adults, and entrapment warnings.
Details age suitability, maximum weight load, and compliance standards.
