Place the filter back inside the filter socket.
Emptying the water container
Empty the condensed water container after
each drying cycle.
If the condensed water container is full, the
programme stops automatically. The Tank
indicator comes on and you must empty the
water container.
To empty the water container:
1. Pull the water container out keeping it in a
horizontal position.
2. Pull the plastic connection out and drain the
water into a basin or equivalent receptacle.
3. Push the plastic connection back in and place
the water container back into position.
4. To continue the programme press the Start/
Pause button.
Cleaning the condenser
If the Condenser indicator flashes, inspect the
condenser and its compartment. If it is dirty,
clean it.
Warning! Do not touch the
metal surface with bare
hands. Risk of injury. Wear
protective gloves. Clean
carefully to avoid damaging
the metal surface.
To inspect:
1. Open the door. Pull the filter up.
2. Slide the release button on the bottom of the
door to open the condenser door.
Tumble Dryer User Manual
23
To Next Page
Loading...
