John Lewis Rouen Bed User Manual

Rouen Bed
PRE-ASSEMBLY PREPARATION
Please check the pack contents before attempting to assemble this product. A full checklist of components is
given in this leaflet. If any components are missing, please contact the John Lewis Helpline.
This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE WHEN
LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 40 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembly.
If you require any additional information or have any issues with this product please call the
John Lewis Helpline on 01244 689949 or email mail@fwgroup-uk.com
Stock Code: 803/44302
Stock Code: 803/44303
Double
King
John Lewis
For product support or spare parts please call
the John Lewis Helpline;
T: 01244 689949
E: mail@fwgroup-uk.com
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools
Thank you for purchasing this Rouen Bed. Please read the instructions carefully before use to ensure safe
and satisfactory operation of this product.
1/6
(NOT INCLUDED)

John Lewis Rouen Bed Specifications

General

Brand	John Lewis
Model	Rouen Bed
Category	Indoor Furnishing
Language	English

Summary

PRE-ASSEMBLY PREPARATION

Necessary Tools

Lists tools required for assembly, noting that some are not included.

Fittings and Parts Checklist

Fittings

Details all the fittings (screws, bolts, washers, keys) required for assembly.

Parts

Lists all the main components of the bed, including headboard, footboard, rails, and legs.

Step-by-Step Assembly

Step One: Initial Part Connection

Connect Side Rails to Headboard and Footboard loosely using pre-inserted bolts.

Step Two: Securing Centre Rail

Insert and secure the Centre Rail, then fully tighten all previous connections.

Step Three: Attaching Headboard Legs

Insert and twist the front legs into the pre-drilled holes on the underside of the Headboard.

Step Four: Attaching Footboard Legs

Attach metal plates to the footboard, then secure the wooden legs to the plates.

Step Five: Installing Slats and Caps

Insert centre caps, slats, and side caps to complete the bed base structure.

Step Six: Final Check

Confirms the bed is ready for use after assembly.

Care and Maintenance

Safety Instructions