Johnson Controls A25 Series - Specifications

A25 Series Warm Air Control with Manual Reset Product/Technical Bulletin 9
S
pecifications
Product
A25AN-1 SPST, opens on temperature rise, setpoint knob adjustment.
A25AP-1 SPST, opens on temperature rise, concealed screwdriver adjustment,
Factory Mutual approved.
A25CN-1 SPDT, setpoint knob adjustment.
A25CP-1 SPDT, concealed screwdriver adjustment, Factory Mutual approved.
Range 25 to 215°F (-4 to 102°C)
Electrical Ratings Volts, AC 120 VAC 208 VAC 240 VAC 277 VAC
Motor FLA* 16 9.2 8 -
Motor LRA* 96 55.2 48 -
Noninductive A 16 16 16 16
Pilot Duty: 125 VA at 24/600 VAC
Ambient Temperature
(Maximum)
Case 104°F (40°C)
Element 300°F (149°C)
Conduit Opening 7/8 in. (22 mm) diameter hole for 1/2 in. conduit
Switch Snap-acting contacts in dust protected enclosure
Cover Finish Gray baked enamel
High Limit Dial Stop 125°F
Material Case 0.063 in. (1.6 mm) galvanized steel
Cover 0.025 in. (0.64 mm) cold rolled steel
Mounting Flange for flat surface
Reset Positive, trip-free reset mechanism (manual reset 2 operation). Control can be reset when
the temperature drops 20F° (11C°) below the dial setting.
Sensing Element Bi-metal rod and tube construction
Shipping Weight Individual pack 1.8 lb. (0.8 kg)
Overpack of 12 units 23 lb. (10.4 kg)
Wiring Connections Screw-type terminals
Agency Listing UL Recognized: File MP640, Guide MBPR
CSA Certified: File LR948, Class 4813 02
Factory Mutual Approved (Models A25AP and A25CP only): Class 3545
* FLA = Full Load Amps; LRA = Locked Rotor Amps. Values are equivalent to a 1 HP motor rating in accordance with UL353.
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these specifications,
consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products.
European Single Point of Contact: NA/SA Single Point of Contact: APAC Single Point of Contact:
JOHNSON CONTROLS
WESTENDHOF 3
45143 ESSEN
GERMANY
JOHNSON CONTROLS
507 E MICHIGAN ST
MILWAUKEE WI 53202
USA
JOHNSON CONTROLS
C/O CONTROLS PRODUCT MANAGEMENT
NO. 22 BLOCK D NEW DISTRICT
WUXI JIANGSU PROVINCE 214142
CHINA
Controls Group
507 E. Michigan Street
P.O. Box 423
Milwaukee, WI 53201 Printed in U.S.A