ANSUL Cartridge Dry Chemical Fire Extinguishers
Models 10, 20, 30, Operation, Inspection, Service and
Maintenance, and Recharge Manual (Form No. F-7674)
2018-OCT-15 REV. 10 PAGE 21
SERVICING MATERIALS
SERVICING MATERIALS
The following are some additional materials and equipment
which will be necessary to properly service ANSUL
cartridge-operated extinguishers in the field.
Special Tools
• Agent funnels Part No. 699
• Cartridge strap wrench Part No. 6380
• Cartridge receiver wrench assembly Part No. 13133
• Handle only Part No. 2609
• Head only Part No. 10852
• Portable cartridge spring scale Part No. 3923
Lubricants
• Silicone grease for o-rings, quad rings
and gaskets
‘‘Dow Corning 33’’ 2 oz tube Part No. 9030
• Steel to aluminum lubricant for
installation of cartridge receiver to shell
Pro-dope 6 lb can Part No. 9071
Touch-Up Paint
• Standard unit red, requires no primer Part No. 77601
(pint can)
• 9.0 oz spray can – red enamel Part No. 79730
• 9.0 oz spray can – red epoxy-CR Part No. 79731
• 12.0 oz spray can – primer Part No. 79729
Labels
• Hydrostatic test (order these through Part No. 11790
Johnson Controls Marketing
Communications)
• Metal inspection tags Part No. 4111
• Paper inspection tags Part No. 2364
Nameplate adhesive
• Pint Part No. 59321
• 3M #10 contact adhesive Part No. 59348
To Next Page
Loading...
Need help?
General