4 Network Room Modules Installation Guide
Wiring
CAUTION: Risk of Electric Shock.
Disconnect power supply before making electrical
connections to avoid electric shock.
IMPORTANT: The Complementary Metal Oxide Semiconductor
(CMOS) circuits in the controller are sensitive to static electricity.
Take suitable precautions.
IMPORTANT: The LP-NRM0xx-000C Series NRM accepts VAC or
VDC power. The LP-NRM5xx-000C and LP-NRM6xx-000C Series
accept VDC power only.
IMPORTANT: Use this NRM Room Command Module only as an
operating control. Where failure or malfunction of the NRM could
lead to personal injury or property damage to the controlled
equipment or other property, additional precautions must be
designed into the control system. Incorporate and maintain other
devices, such as supervisory or alarm systems or safety or limit
controls, intended to warn of or protect against failure or
malfunction of the NRM.
IMPORTANT: The installation of electrical wiring must conform to
local codes and should be carried out by authorized personnel only.
Users should ensure that all Johnson Controls products are used
safely and without risk to health or property.
To Next Page
Loading...
Need help?
General
