Johnson Controls NS8000 Series Installation Instructions

Part No. 24-11256-00007, Rev. —
2
NS8000 Series
Location considerations
Note:
48 in (1.2 m)
°C
MAX MIN
50°C
122°F
0°C
32°F
MAX 90% RH
MIN 10% RH
85°F (29°C) MAX DP
• Locate the network sensor away from steam or water pipes, warm air stacks, unconditioned areas (not heated or cooled),
or sources of electrical interference.
• Height requirements may vary depending on the site.
• Network sensors without CO
2
sensing are shock and vibration resistant, but not shock and vibration proof. Be careful not
to drop the unit or mount it where it could be exposed to excessive vibration. Dropping a CO
2
network sensor may result
in readings outside of the specied accuracy tolerance.
Special tools (only one type needed)
Johnson Controls T-4000-119 Allen-head adjustment tool
JC 5309 Allen-head exible tool
1/16 in (1.5 mm) Allen wrench

Johnson Controls NS8000 Series Specifications

General

Brand	Johnson Controls
Model	NS8000 Series
Category	Accessories
Language	English