Johnson Controls PENN P470 - Ordering and Specifications; Ordering Information

P470 Electronic Pressure Control with Display Product/Technical Bulletin 13
Ordering Information
Note: P470 controls do not include a transducer or
wiring harness. P499 Transducer and wiring harness
must be purchased separately. Transducer must be
matched to the selected pressure range. See Table 2.
Repair Information
The P470 pressure control and P499 transducer are
not field repairable. Perform the following procedures,
in the order they are presented, to determine the
problem. If the problem is with the control or
transducer, contact a Johnson Controls/PENN sales
representative for a replacement.
Technical Specifications
Table 4: Ordering Table for P470 Controls, Transducers and Wiring Harnesses
Item Product Code Description
P470 (Low-Voltage)
Electronic Pressure
Control with Display
P470FB-1C Low Voltage (<30 VAC) Electronic Pressure Control with Display
Supply Voltage: 24 VAC Class 2 Transformer
(See Technical Specifications
for complete Relay Electrical Ratings.)
P470 (Line-Voltage)
Electronic Pressure
Control with Display
P470EB-1C
Line Voltage Electronic Pressure Control with Display
Supply Voltage: 120 or 208/240 VAC
(See Technical Specifications
for complete Relay Electrical Ratings.)
P499 Electronic
Pressure
Transducers
1
P499RAP-101C
P499RAP-101K
0 to 100 psi Pressure Transducer with 1/8 in. NPT Male Fitting
P499RCP-101C
P499RCP-101K
0 to 100 psi Pressure Transducer with 1/4 in. SAE (Schrader) Female Fitting
with integral valve depressor
P499RAP-105C
P499RAP-105K
0 to 500 psi Pressure Transducer with 1/8 in. NPT Male Fitting
P499RCP-105C
P499RCP-105K
0 to 500 psi Pressure Transducer with 1/4 in. SAE (Schrader) Female Fitting
with integral valve depressor
P499RAP-107C
P499RAP-107K
0 to 750 psi Pressure Transducer with 1/8 in. NPT Male Fitting
P499RCP-107C
P499RCP-107K
0 to 750 psi Pressure Transducer with 1/4 in. SAE (Schrader) Female Fitting
with integral valve depressor
Wiring Harnesses for
P499 Transducers
WHA-PKD3-200C 6 ft 6-1/2 in. (2 m) 3-Wire Cable with Plug-in Connector for P499 Transducer
WHA-PKD3-400C 13 ft 3 in. (4 m) 3-Wire Cable with Plug-in Connector for P499 Transducer
WHA-PKD3-600C 19 ft 8 in. (6 m) 3-Wire Cable with Plug-in Connector for P499 Transducer
1. C suffix is transducer (only). K suffix is transducer with 2 meter long wiring harness.
Table 5: Output Relay Contacts Electrical Ratings
P470EB-1 P470 FB-1
120 VAC 208 VAC 240 VAC 24 VAC
Horsepower N.O. (N.C.) 1 (1/4) 1 (1/3) 1 (1/2) 100 VA,
30 VAC maximum,
Class 2
Full Load Ampere N.O. (N.C.) 16 (5.8) 9.2 (4.0) 8.0 (4.9)
Locked Rotor Ampere N.O. (N.C.) 96 (34.8) 55.2 (24) 498 (29.4)
Non-Inductive Ampere N.O. (N.C.) 15 (10) 10 (10) 10 (10)
Pilot Duty 125 VA (N.O.) at 24
–240 VAC
125 VA (N.C.) at 120
–240 VAC
50 VA (N.C.) at 24 VAC