Table 3: BACnet settings
Value Access Range Default Description
Device object identifier Write 0-4,194,303 Decimal
value of
the last two
octets of the
Wi-Fi MAC
Address.
Example:
52,390 where:
MAC=AC:0B:F
B:6C:CC:A6
Uniquely identifies the
CWCVT when connected to a
BACnet network.
Typically, no need to change.
MS/TP MAC Write 0-127 2 The MS/TP address that the
CWCVT uses to participate in
the token ring. The address
may need to change if it
conflicts with an existing
device address.
Typically, no need to change.
MS/TP network number Write 1-65534 65001 Used to route BACnet
messages to the MS/TP bus.
Typically, no need to change.
BACnet IP port Write 1-65534 47808 The Ethernet port used to
send and receive BACnet IP
messages.
Typically, no need to change.
BACnet IP network number Write 1-65534 10001 Used to route BACnet
messages to the BACnet IP
(Wi-Fi) bus.
Typically, no need to change.
BLE network number Write 1-65534 555 Used to route BACnet
messages to the BLE bus.
Typically, no need to change.
Note: For more details about MS/TP communications bus see the MS/TP Communications Bus
Technical Bulletin, LIT-12011034.
13CWCVT Wireless MS/TP Converter User Guide
To Next Page
Loading...
Need help?
General
