Introduction
The Connected Workflow Wireless MS/TP Converter (CWCVT) is a communications converter that
provides a temporary wireless connection between a laptop that runs Johnson Controls BAS Tools
and BACnet MS/TP controllers wired to an MS/TP bus. For example, you can connect the CWCVT
to the System Configuration Tool (SCT) or a mobile device that runs the Connected Workflow
Application (CWa) mobile application.
The CWCVT supports the following wireless connection modes:
• Bluetooth low energy mode (BLE Router)
• Wi-Fi access point mode (Wi-Fi AP Router)
You can discover devices connected to the MS/TP bus, download applications, and commission the
equipment with both wireless modes.
Overview
Figure 1: CWCVT overview
Callout Description
A RJ12 connector. Provides power and MS/TP communications when connected
to the SA bus or the FC bus of a Johnson Controls equipment controller.
B Lanyard connector
C Color graphic display
5CWCVT Wireless MS/TP Converter User Guide
To Next Page
Loading...
Need help?
General
