Wi-Fi settings
Table 5: Wi-Fi settings
Value Access Range Default Description
Access point name Write 8 to 32
printable
characters
CWCVT -
xx:xx:xx
Where
xx:xx:xx is
the last three
values of the
Wi-Fi MAC
Address.
The Access Point name (also
SSID) that is visible from a
host device you attempt to
pair with the CWCVT over its
Wi-Fi Access Point.
Typically, no need to change.
You may want to change this
to make it easier to identify
in a long list of available Wi-
Fi access points.
Name rules:
• Minimum eight
characters
• Maximum 32 characters
• Any printable character
Access point password Write 10 to 64
printable
characters
Random A user configurable access
point password.
Typically, no need to change.
You may want to change this
to increase the security or
make it easier to remember.
Password rules:
• Minimum ten characters
• Maximum 64 characters
• Any printable character
Configured channel Write 1-11 1 The Wi-Fi channel used
by the CWCVT Access
Point. Typically, no need to
change. If you change the
channel, chose one of the
standard channels 1, 6, or
11. Choosing other channels
may cause interference with
other wireless networks.
Current Channel Read The current channel
that is used by the Wi-Fi
connection.
Max Tx Power Read The transmit power in dBm
that the Wi-Fi connection
uses. This may be different
based on the region where
Wi-Fi is used.
Note: Printable characters include: a-z, A-Z, 0-9, and ~`!@#$%^&*()_-+=<>,.
15CWCVT Wireless MS/TP Converter User Guide
To Next Page
Loading...
Need help?
General
