Johnson Controls Unisab III Manual

Unisab III panel mounting kit
Fig. 1
• Unisab III display mounted on a pan-
el door
• Complete kit:
Johnson Controls part no.: 1571-115
Fig. 2
• Unisab III controller mounted inside
the panel with vibration dampers on
the panel mounting plate.
Unisab III panel mounting kit
Mounting instruction - Unisab III
006093 - en 2009.02.
1/6

Johnson Controls Unisab III Specifications

General

Category	Control Systems
Manufacturer	Johnson Controls
Enclosure Rating	IP20
Power Consumption	5 VA
Operating Temperature	0 to 50°C (32 to 122°F)
Input Voltage	24 VAC/DC