Need help?Do you have a question about the Johnson Controls Unisab III and is the answer not in the manual?
General| Category | Control Systems |
|---|---|
| Manufacturer | Johnson Controls |
| Enclosure Rating | IP20 |
| Power Consumption | 5 VA |
| Operating Temperature | 0 to 50°C (32 to 122°F) |
| Input Voltage | 24 VAC/DC |
Describes how to activate and deactivate the emergency stop function.
Overview of the Unisab III control system's purpose, function, and application.
Details the Unisab III display layout, including top bar, content, info, and F-key areas.
Explains the three sections of the Unisab III front panel: control, menu, and F-key.
Describes the menu system structure for compressor operation, set values, and configuration.
Covers user login, password levels, and session management within the Unisab III.
Details options for customizing the user interface, including idle timer and auto expansion.
Explains how to change the display language and adjust screen contrast for optimal visibility.
Provides a step-by-step guide on modifying alarm limits, set points, and timer values.
Describes the use of predefined and user-definable favourite screens for daily compressor operation.
Explains how to select and operate the compressor in manual, auto, or remote control modes.
Details manual capacity loading/unloading, starting, and stopping the compressor.
Covers acknowledging compressor shutdowns and alarms, and their indication methods.
Explains how to reset the Unisab III to its factory default settings for various parameters.
Lists different set values for pressures, temperatures, and timers with min, max, and factory settings.
Provides min, max, and factory values for pressure measurements in screw compressors.
Lists min, max, and factory values for temperature measurements in screw compressors.
Details min, max, and factory values for pressure measurements in reciprocating compressors.
Shows min, max, and factory values for temperature measurements in reciprocating compressors.
Presents pressure and temperature data for HPO/HPC compressors with min, max, and factory settings.
Contains explanatory notes related to pressure and temperature measurements and their associated limits.
Explains the methods for calculating oil pressure based on different compressor types and diagrams.
Lists all possible shutdowns and alarms for screw compressors with their Danbuss and Profibus/Modbus IDs.
Details shutdowns and alarms for reciprocating compressors, including their identification numbers.
Presents timer values for screw compressors, including factory, low, high, and adjustable settings.
Lists timer values for reciprocating compressors with factory, low, high, and adjustable parameters.
Lists essential spare parts kits for the Unisab III control system, including part numbers.
Provides part numbers for various position transmitters compatible with different SAB compressor models.
Displays historical records of measured values related to compressor shutdowns.
Shows historical data for digital input and output states during compressor shutdowns.
Details the digital inputs and outputs within the Unisab III's hardware for diagnostic purposes.
To Next Page
