Whenever the emergency stop is activated during operation, the alarm text Compr.
motor er-
ror will appear in the display. Before the compressor can be restarted, deactivate the alarm
by means of the
F4
/RESET key and release the emergency stop.
Please note: If Unisab III is set at Remote or Auto, the compressor will restart automatically.
Technical data
Power supply: Nominal VAC Tolerance Hz
85-250 47-63
Consumption: 32 VA
Ambient temperature: 0-55°C (during operation)
Humidity: 10-90% relative humidity (not condensing)
Tightness: IP 54
Operating manual - Unisab III
005650-en 2013.10
3/48
To Next Page
Loading...
