Johnson Controls YORK RSR-4445 - FIGURE 4 - Wiring Diagram Easy PAK RP-1000 V, -114 V & -2200; FIGURE 5 - Wiring Diagram RSR-2240, -2250, -4436, -4445 & RP-2400, -3400

JOHNSON CONTROLS
24
FORM 50.40-OM1 (713)
ISSUE DATE: 07/17/2013
SECTION 3 - DIAGRAMS
Legend
SW Switch, On-Off, Motor
HP-LP Switch, Pressure, Combination Hi-Lo Control
LS Switch, Liquid Level
LSR Relay, N.O. contact
HTR Heater, Oil Separator (25 watt)
LD17565
FIGURE 4 - WIRING DIAGRAM EASY PAK RP-1000V, -114V & -2200
*Interlock Receptacle will not allow
EASY-PAK Compressor to operate unless
liquid level switch LS is in the electrical
control circuit.
Johnson Controls supplies mating
"Twist-Lock" plug for eld wiring
connection by customer.
(1) ex cord with special interlock plug
supplied by Johnson Controls for wiring to
customer's Pumpout vessel pressure liquid
level switch.
Legend
SW Switch, On-Off (Compressor)
HP-LP Switch, Pressure, Combination Hi-Lo Control
LS Switch, Liquid Level
1-R Relay, Liquid Level, N.O. contact
M Contactor, Compressor Motor
FIGURE 5 - WIRING DIAGRAM RSR-2240, -2250, -4436, -4445 & RP-2400, -3400
LD17566
Easy-Pak Model RP-2400 is supplied with 8'
exible cord and interlocking plug for liquid level
switch circuit on refrigerant storage tank.