Need help?Do you have a question about the Johnson Pump Viking Power 16 and is the answer not in the manual?
General| Brand | Johnson Pump |
|---|---|
| Model | Viking Power 16 |
| Category | Water Pump |
| Language | English |
Describes the ideal use cases for the pump in marine applications like shower drains, waste water, and bilge pumping.
Details model numbers, features, connection types, maximum head and suction lift, motor power, and required fuse size.
Provides pressure versus flow rate and amp draw data for 12V and 24V operation, including fuse requirements.
Explains the operation of the single-chamber, self-priming diaphragm pump with a focus on its design for debris flushing.
Instructions for mounting the pump in a dry location, covering orientation, fasteners, and recommended tubing.
Details the three possible orientations for the pump's motor and the procedure to change them.
Covers electrical installation requirements, thermal protection, and correct wiring procedures according to standards.
Illustrates the wiring connections and provides a table for wire size and length based on voltage drop.
Information on the pump's self-priming capability up to 3 meters and its ability to run dry without damage.
Procedure for draining the pump to prevent damage from freezing during winter storage.
Guides for servicing the pump, including changing the diaphragm, pump housing, and cleaning check valves.
A chart listing common pump symptoms, their potential causes, and recommended solutions for resolution.
To Next Page