901-10113 - 10 - 9/16/2024
2.3 Safety Labels and Locations
These safety warnings and labels shown below are placed on the truck body and Cold Plate
refrigeration system to draw attention to potential safety concerns, avoid system damage, and to
provide operation instructions and service information. Please read all the information carefully to
avoid injury and system damage. Familiarize yourself with the locations of these labels. If labels
become damaged or missing, contact Johnson Truck Bodies for replacements.
Table 1: Refrigeration System safety labels and locations
Located at the electrical system inlet. Other
versions of this decal may list the voltage and
phase of the electrical system.
Low temperature bodies only.
Located next to vacuum relief port, typically at the
curbside front corner. Keep port free from
obstruction to prevent blockage.
Prevents doors being stuck shut due to shrinkage
of cold air.
To Next Page
Loading...