Johnson AE Series - Page 19

901-10113 - 19 - 9/16/2024
Upon connection to AC power, the
refrigeration system controller starts up.
Start-up takes about 10 seconds.
Turn On System
At the HOME screen, the F4 button is the
ON-OFF SWITCH. If Switch Status is OFF,
press F4 to turn ON the cooling system.
When Switch Status is OFF, the blinking
yellow indicator is a reminder that the
system is not cooling.
Turn the Switch OFF before unplugging
from AC power.
Run System
When Switch Status is ON, if the Cold
Plates are not frozen, the refrigeration
compressor runs to freeze the solution in
the Cold Plates and cool the body.
The blue indicator shows that the system
is actively cooling.
*In the event of a power outage, the
Switch remains at its previous setting. If it
was ON, it will still be ON when power is
restored.
Time to Pre-Cool a cold system.
(After use on route)
Usually 8 hours