Johnson C8000 User Manual

35
JOHNSON FITNESS TREADMILL T8000/T8000 PRO
34
JOHNSON BIKE C8000 / R8000 JOHNSON BIKE C8000 / R8000
MANAGER’s CUSTOM MODE
The Manager’s Custom Mode allow the club owner to customize the bike for the club.
To enter the Manager’s Custom Mode, press and hold down the
"LEVEL ARROW keys
“ . Continue to hold down these two keys until the INSTRUCTION CENTER displays
“MANAGER MENU”.
1. To scroll through the list of Manager’s Custom Mode, use the
“LEFT / RIGHT ARROW
keys”, or "LEVEL ARROW keys". The INSTRUCTION CENTER will display, in turn, each of
custom settings.
2. To select a custom mode, press the
SELECT key to enter.
3. To change the value of the setting, use the
“LEFT / RIGHT ARROW keys”, or "LEVEL
ARROW keys".
4. To confirm and save the value of the setting, press the QUICK START key. “SETTING
SAVED” will appear in the INSTRUCTION CENTER. To exit the setting without saving, press
the RESET key within 5 seconds, or if there is no key pressed, the system will resume
automatically.
P7
P8
N/A 0 65,000 hrs N/Ahour
30 sec 30 sec 180 sec 1second
ACCUMU-
LATED
TIME
PAUSE
TIME
CUSTOM
SETTING
DEFAULT MINIMUM MAXIMUM UNIT STEP DESCRIPTION
Accumulated time is not editable, but
only for display. Holding the Left and
Right Arrow keys simultaneously to reset
the accumulated time. After the machine
reaches the maximum time, it will reset
to "0" automatically.
This is the maximum time during which a
workout can remain in pause mode.
Restrictions exist for the machine not
equipped with a battery.
P9
P10
P11
P12
P13
P14
P15
CB N/A N/A N/A
MODEL
SOFTWARE
VERSION
ERROR
LOG
METS
LANGUAGE
CB - Upright Bike
RB - Recumbent Bike
EL – Elliptical Trainer
ST - Stepper
Software version is not editable, but only
for display.
If this option is "ON", the METs prompt
becomes an individual display in PROMPT
AREA. If "OFF", there will be an alternate
prompt in RPM and METs at the lower-
right corner of the WORKOUT PROFILE
WINDOW.
The function would clear all custom
settings had stored on the unit and all
settings return to manufacturer default
value. Holding the Left and Right Arrow
keys simultaneously to clear all custom
settings values.
N/A
English
N/A N/A N/A N/A
N/A
N/A N/A
N/A
N/A
UNITS
The measurement unit prompts for weight,
distance, and speed.
Metric Metric English N/A N/A
N/A N/A N/A N/A N/A
OFF ON OFF N/A N/A
RESET
ALL
N/A N/A N/A N/A N/A
THE LIST OF MANAGER'S CUSTOM MODES
P0
P1
P2
P3
P4
P5
P6
99 min
20 min
1
68kg /
150lbs
N/A
20 min
5 min
1
34kg /
75lbs
0
99 min minute
max.
time
10
182kg /
400lbs
104,000
km /
65,000
mile
MAXIMUM
TIME
DEFAULT
TIME
DEFAULT
LEVEL
MAXIMUM
LEVEL
DEFAULT
WEIGHT
DEFAULT
AGE
ACCUMU-
LATED
DISTANCE
CUSTOM
SETTING
DEFAULT MINIMUM MAXIMUM UNIT STEP DESCRIPTION
Control the default program time.
Control the starting resistance level for
all programs.
Control the default weight used in calorie
calculations. Set to default unit change
(kilograms or pounds). Displayed in native
units.
Enable fitness club managers to set the
program maximum workout duration
limits during peak and non-peak hours of
club traffic. Active variable displayed in
the TIME display after change.
Enable to set maximum resistance level
for all programs.
Control the default users age used in
target heart rate calculations.
1
minute 1
1
1
n/a
20 1 20
n/a
30 10 99
age
kg/lbs
1
1
N/A
km /
mile
Accumulated distance is not editable, but
only for display. Displayed in native units
(miles or kilometers). Holding the Left and
Right Arrow keys simultaneously to reset
the accumulated distance. After the
equipment reaches the maximum
distance, it will reset to "0" automatically.
The native language prompts in the
INSTRUCTION CENTER.
Error log is not editable, but only for display.
Holding the Left and Right Arrow keys
simultaneously to erase the error log.

Johnson C8000 Specifications

General

Brand	Johnson
Model	C8000
Category	Exercise Bike
Language	English