MAINTENANCE
1. Close the tap and remove the
water supply hose from it.
2. Clean the filter with a brush.
3. Unscrew the water supply hose
from the backside of the
machine. Pull out the filter with
long nose pliers.
4. Use a brush to clean the filter.
5. Reinstall the filter to the water
inlet and reconnect the water
supply hose.
6. Clean the Inlet filter every 3
months to ensure the normal
operation of the appliance.
Cleaning the Inlet Filter
Diminishing water flow is a sign that the filter need to be
cleaned.
Note!
Clean The Detergent Dispenser
•Do not use abrasive or caustic agents to clean plastic parts.
•Clean the detergent dispenser every 3 months to ensure the normal
operation of the appliance.
Press the release
and remove the
dispenser
drawer
Clean the
dispenser drawer
and the softener
cover under water
Clean the recess
with an soft
brush
Insert the
dispenser
drawer
Note!
1. Press down the release [ ] on the softener cover and pull the
dispenser drawer out of the recess. Clean the inside of the recess
with a brush.
2. Lift the softener cover off the dispenser drawer and wash both
items with water.
3. Restore the softener cover and push the drawer back into the recess.
1
3
4
2
1 2
3 4
To Next Page
Loading...
