MAINTENANCE
Cleaning the Drain Pump Filter
•Make sure that the machine has finished the washing cycle and is
empty. Switch it off and unplug it before cleaning the drain pump
filter.
•Be careful of hot water. Allow the water to cool down. Risk of
scalding!
•Clean the filter periodically every 3 months to ensure the normal
operation of the appliance.
Warning!
•
When the appliance is in use and depending on the programme
selected there can be hot water in the pump. Never remove the
pump cover during a wash cycle, always wait until the appliance
has finished the cycle, and is empty. When replacing the cover,
ensure it is securely re-tightened.
Caution!
Open the
Service filter
Open the filter by
turning to the
counter clockwise
Remove
extraneous
matter
1
Close the
lower cover
cap
3
2
4
To Next Page
Loading...
