07
Description
State of LED Indicator
A USB flash drive is connected
normally.
After USB flash drive connection:
Slow blinking at 0.5Hz
(once every second)
Not powered on, without USB
flash drive.
Off
Description
State of LED Indicator
● Export fault record.
● Export test run data.
Fast blinking at 2.5Hz
(once every 0.2s)
Not powered on and not
exporting data
Off
● Reserve: LED5 (red)
● USB flash drive connection LED indicator: LED6 (red)
Remains on
● Failure to export fault record
● Failure to export test run data
● Failure to receive app. from the
USB flash drive
To Next Page
Loading...