Johnson MA3-BK - Export of Fault Record and Test Run Report

10
4. When the pop-up window of the AP Connection Mode
appears, open the cap of the Bluetooth module, press and
hold SW1 for more than 5s, and select Completed and
Confirm.
5. When the blue LED1 of the Bluetooth module remains on
and the app shows that the connection is successful, the
Bluetooth module is connected to the APP.
7 Export of fault record and test run report
1. Function description
● Fault record:
The Bluetooth module can save the information and waveform data of
the last 10 faults, as well as the IDU and ODU operating data before
these faults (32 sets of operating data, including the data at the time
of the fault, 30s before the fault, 1min before the fault, and 2min to
30min before the fault).
● Test run report:
During the test run of the system, the Bluetooth module checks the
operating state of the connected device and records the results and
data of the latest test run.