17 18
4. Thread the shoulder harness
through the shoulder harness slot.
38
5. Detach the elastic bands on the
back of head support to remove
the head support soft goods.
39
To re-assemble the soft goods,
reverse the aforementioned steps.
38
39
37
!
Please wash the seat cover and inner padding with cold water under
30°C.
!
Do not iron the soft goods.
!
Do not bleach or dry clean the soft goods.
!
Do not use undiluted detergents, gasoline or other organic solvent to
wash the infant carrier or base. It may cause damage to the
enhanced child restraint.
!
Do not twist the seat cover and inner padding in an attempt to dry. It
may leave the seat cover and inner padding with wrinkles.
!
Please hang dry the seat cover and inner padding in the shade.
!
Please remove the infant carrier and base from the vehicle seat if not
in use for a long period of time. Put the enhanced child restraint in a
cool, dry place and somewhere your child cannot access it.
Care and Maintenance
36
To Next Page
Loading...
Need help?
General
