Set it to receive all location
short message ,alert message
and command reply message.
Set it to replace the unique ID
of each location short
message.
jeson,09-28
12:11:02,Speed:32km/h,Battery:80%,GPS:13,
STANDARD,
http://maps.google.com/?q=22.549737N,114.076
685E
when the battery charge is low
than 20%, there is a low battery
alert.
Maximum value 90, minimum value 10.
JT600 outputs Greenwich time. It has to be
adjusted to local time. To set time zone behind
GMT use –(Minus sign)
Enable this function, and you
will get a location short
message after called the unit.
Default, This function is disabled. 1)The calling
number must be authorization numbers(SMS
Primary number or VIP numbers).2)The SIM card
in tracker must be activated call screening
function.3) It’s better to hold on 2 times ring
before hang up.
Enable this function, And
Default, This function is disabled.