- 13 -
ATTENTION
When cleaning always wear rubber gloves.
EN
INDUSTRIAL GLASS AND DISHWASHER—USERS MANUAL
RINSE ASSEMBY (3500ST, 4000ST)
1. Carefully unscrew the jets and take out the rinse jet spinners.
2. Immerse the jets in a solution containing some liquid descaling product (for ex. Vinegar).
3. Rinse with water. If necessary clean the jets with a pin.
4. Before replacing the jets and the spinners run a filling/draining cycle in order to clean the rinse assembly from soil
or debris.
5. Replace the jets and the diffuser back onto the rinse assembly.
STATEMENT OF COMPLIANCE WITH EUROPEAN DIRECTIVE
2002/95/CE RoHS
In compliance with what is expressly required by European Directive 2002/95/EC (Restriction of Hazardous Substances
in electrical and electronic equipment - RoHS) we declare full compliance with the Directive at the time and manner pre-
scribed.
INFORMATION FOR USERS
Under Article. 13 of Legislative Decree 25 July 2005, n. 151 "Implementation of Directives 2002/95/EC and 2003/108/EC
on the reduction of hazardous substances in electrical and electronic equipment and waste disposal." The symbol as
shown on the equipment indicates that at the end of the products life, it must be collected separately from other waste.
The user should, therefore, take the equipment at the end of its useful life to a dedicated waste collection station where
electrical and electronic items are handled. Alternatively, it can be returned to the dealer when buying a new equivalent
product. The separate collection and the subsequent forwarding for recycling, treatment and environmentally compatible
disposal helps to avoid negative environmental and health issues and to promote the recycling of raw materials. Illegal
disposal by the user may result in administrative penalties. These are provided for in the Legislative Decree number
22/1997 "(Article 50 and following of Legislative Decree number 22/1997).
To Next Page
Loading...