To Next PageTo Next Page
Need help?Do you have a question about the JONATHAN Y Amelia JYL2032A and is the answer not in the manual?
Recommendations for licensed electrician installation and switching off power supply before installation.
Inspect the item carefully for damage or defects before installation. Do not install if damaged.
Ensure all parts are present, assemble on a soft surface, and follow guidelines for safe use.
Detailed steps for assembling the lamp, including connecting parts and installing the bulb and shade.
Recommendations for licensed electrician installation and switching off power supply before installation.
Inspect the item carefully for damage or defects before installation. Do not install if damaged.
Ensure all parts are present, assemble on a soft surface, and follow guidelines for safe use.
Detailed steps for assembling the lamp, including connecting parts and installing the bulb and shade.
This document outlines the assembly, usage, and maintenance of a floor lamp, emphasizing safety precautions and proper handling.
The device is a floor lamp designed to provide illumination. It utilizes a standard "A" type bulb with a maximum wattage of 100W, a CFL bulb with a maximum of 23W, or an LED bulb with a maximum of 12W. A 9-watt LED bulb is included in the box. The lamp features a polarized plug as a safety feature, designed to reduce the risk of electric shock by ensuring it fits into a polarized outlet only one way.
The assembly process is straightforward and estimated to take approximately 6 minutes. Before starting, users are instructed to ensure all parts are present and undamaged. Assembly should be performed on a soft surface to prevent scratching the finish.
The assembly sequence involves connecting various tubular and decorative components to form the lamp's main structure. The power cord is routed through the lamp base, and the stem connections are tightened by screwing the tubes together. Specifically, tube (B) screws onto base (A), tube (C) onto tube (B), part (D) onto tube (C), and parts (E,F,G,H) onto tube (D). Care must be taken not to overtighten or rotate the lamp body too hard to avoid breaking the base screw.
Once the main structure is assembled, the harp (I) is inserted into the saddle (G). The shade (K) is then placed onto the harp (I), and the finial (L) is tightened onto the harp (I) to secure the shade. Finally, the bulb (J) is inserted into the socket (H). After assembly, the lamp should be placed on a level surface to check for stability.
For operation, the lamp is plugged into a polarized outlet. If the plug does not fit fully, it should be reversed. If it still does not fit, a qualified electrician should be contacted. The use of an extension cord is permissible only if the plug can be fully inserted into it. Users are explicitly warned not to attempt to defeat the safety feature of the polarized plug.
Regular care and maintenance are recommended to preserve the lamp's appearance and functionality. Before any cleaning, the lamp should be unplugged from the power source.
For cleaning the lamp shades, a feather duster or an appropriate vacuum-brush attachment can be used to remove dust. The lamp bases should be cleaned with a soft, dry cloth, using methods appropriate for the material of the base. It is crucial to avoid using chemicals and household cleaners, as these can damage the finish of the lamp.
In terms of safety and longevity, the external flexible cable or cord of the luminaire is not replaceable. If the cord becomes damaged, the entire luminaire must be destroyed to prevent hazards.
Installation of this lighting fixture should be performed by a licensed electrician. Before any installation or maintenance, the main electrical supply from the main fuse box/circuit breaker must be switched off.
Upon receiving the product, users should carefully inspect all parts. If any damage or obvious defect is found, the item should not be installed. Once installed, the item may not be returned. These precautions are in place to reduce the risk of fire, electrical shock, or injury to persons or property, ensuring safe use and installation of the lamp.
General| Brand | JONATHAN Y |
|---|---|
| Product Type | Table Lamp |
| Design | Modern |
| Model Number | JYL2032A |
| Category | Home Lighting |
| Base Material | Metal |
| Shade Material | Fabric |
| Shade Color | White |
| Bulb Type | LED |
| Bulb Included | Yes |
| Switch Type | On/Off |
| Number of Lights | 1 |
| Voltage | 120V |
| Weight | 5.5 lbs |
| Material | Metal, Glass |
| Wattage | 9W |
| Shade Diameter | 12 in. |
| Width | 12 in. |
| Length | 12 in. |
