JONATHAN Y Jaxon JYL4031A - User Manual

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT DO NOT INSTALL ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
Model# JYL4031A
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*f f
Model#
JYL4031A
Product Dimensions: 16"L X 16"W X 60.5"H
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of
electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the
plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully
inserted do not attempt to defeat this safety feature
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTITY
Part List and Hardware List
i
nser
t
e
d
.
d
o no
t
a
tt
emp
t
t
o
d
e
f
ea
t
thi
s sa
f
e
t
y
f
ea
t
ure.
A Lamp base 1X F Harp 1X
B Lamp Body 1X G Shade 1X
C Neck 1X H Finial 1X
D Saddle 1X I Bulb 1X
E Socket 1X

Summary

Safety and Warnings

General Installation Warnings

Critical warnings about electrical supply and installation by a licensed electrician.

Important Safety Instructions

Guidelines for safe use, preventing shock, fire, and injury during assembly and operation.

Care and Maintenance

Cleaning Procedures

How to properly clean and maintain the lamp's various parts using safe methods.

Parts List and Assembly Preparation

Part List and Hardware

Enumerates all components and hardware required for assembly.

Preparation and Bulb Usage

Pre-assembly checks, part verification, and recommended bulb types.

Assembly Instructions

Step-by-Step Assembly Guide

Detailed instructions for putting the lamp together, from base to bulb.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features
5. Assembly Steps
6. Part List

This document provides instructions for the assembly, use, and maintenance of the JONATHAN Y Model# JYL4031A floor lamp.

Function Description:

The JYL4031A is a portable floor lamp designed to provide illumination. It features a polarized plug as a safety feature to reduce the risk of electric shock. The lamp is intended for indoor use and requires assembly before operation.

Important Technical Specifications:

• Model Number: JYL4031A
• Product Dimensions: 16"L x 16"W x 60.5"H
• Bulb Type: The lamp is designed to use an ON/OFF Type "A" bulb with a maximum wattage of 100-watt, or a CFL bulb with a maximum wattage of 23-watt, or an LED bulb with a maximum wattage of 12-watt.
• Included Bulb: A 9-watt LED bulb is included in the box.
• Electrical Safety: The lamp features a polarized plug (one blade wider than the other) to reduce the risk of electric shock. It is crucial to ensure the plug fits fully into the outlet. If it does not, the plug should be reversed. If it still does not fit, a qualified electrician should be contacted. The use of an extension cord is only permitted if the plug can be fully inserted into the extension cord. Defeating this safety feature is strictly prohibited.
• External Cable/Cord: The external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the luminaire must be destroyed.

Usage Features:

• Assembly: The lamp requires assembly. The estimated assembly time is 6 minutes. All parts should be checked for presence and damage before starting assembly. Assembly should be performed on a soft surface to prevent scratching the finish.
• Bulb Installation: After assembly, the bulb (I) is inserted into the socket (E).
• Stability Check: After full assembly, the lamp should be placed on a level surface to check for stability.
• Polarized Plug: When plugging in the lamp, ensure the polarized plug (one blade wider than the other) fits correctly into the outlet. If it doesn't fit initially, reverse the plug. If it still doesn't fit, consult a qualified electrician. Do not force the plug or use an extension cord unless the plug can be fully inserted.

Maintenance Features:

• Cleaning: Before cleaning, unplug the lamp.
  • Shades: Dust shades with a feather duster or an appropriate vacuum-brush attachment.
  • Lamp Bases: Wipe lamp bases with a soft, dry cloth. Clean lamp bases using methods appropriate to the material of the base.
• Chemical Avoidance: Avoid the use of chemicals and household cleaners, as they may damage the finish of the lamp.
• Installation Warning: Installation of this lighting fixture is recommended to be done by a licensed electrician. Before installation, switch off the main electrical supply from the main fuse box/circuit breaker.
• Inspection: Inspect the item carefully before attempting to install. If there is any damage or obvious defect, do not install it. The item may not be returned once it has been installed.
• Cord Damage: If the external flexible cable or cord is damaged, the luminaire must be destroyed as it cannot be replaced.

Assembly Steps:

1. Step 1 (Body Assembly):
   • Ensure all parts are aligned before assembly.
   • Screw the lamp neck (C) onto the lamp body (B3).
   • Screw the lamp body (B3) onto the lamp body (B2).
   • Screw the lamp body (B2) onto the lamp body (B1).
   • Screw the lamp body (B1) onto the lamp base (A).
   • Be careful not to twist the power cord and tighten securely. Avoid rotating the lamp body too hard to prevent the base screw from breaking.
2. Step 2 (Harp, Shade, Finial, and Bulb Installation):
   • Insert the harp (F) into the saddle (D).
   • Place the shade (G) on the harp (F).
   • Tighten the finial (H) onto the harp (F).
   • Insert the bulb (I) into the socket (E).
3. Step 3 (Stability Check):
   • Place the assembled lamp on a level surface to check if everything is stable.

Part List:

• A: Lamp base (Quantity: 1X)
• B: Lamp Body (Quantity: 1X)
• C: Neck (Quantity: 1X)
• D: Saddle (Quantity: 1X)
• E: Socket (Quantity: 1X)
• F: Harp (Quantity: 1X)
• G: Shade (Quantity: 1X)
• H: Finial (Quantity: 1X)
• I: Bulb (Quantity: 1X)

JONATHAN Y Jaxon JYL4031A Specifications

General

Brand	JONATHAN Y
Model	Jaxon JYL4031A
Category	Home Lighting
Language	English