JONATHAN Y JYL1102A - User Manual

To Next Page

WARNING

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Model# JYL1102A

Product Dimensions: 12"Lx 12"W x 25"H

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this lamp cannot be replaced;

If the cord is damaged, the lamp shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the

outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord

unless the plug can be fully inserted. do not attempt to disregard this safety feature.

Part List and Hardware List

PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY

A Lamp base 1X D Shade 1X

B Lamp body 1X E Metal Ring 1X

C Socket 1X F Bulb 1X

Need help?

Do you have a question about the JONATHAN Y JYL1102A and is the answer not in the manual?

Summary

Assembly Preparation

Step 1: Base and Body Assembly

Screw the Lamp body onto the Lamp base, then screw the Socket Assembly onto the Lamp body.

Step 2: Shade and Bulb Installation

Place the shade on the Socket, tighten the metal ring, and insert the bulb into the socket.

Step 3: Stability Check

Place the light on a level surface to ensure stability.

Summary

Assembly Preparation

Step 1: Base and Body Assembly

Screw the Lamp body onto the Lamp base, then screw the Socket Assembly onto the Lamp body.

Step 2: Shade and Bulb Installation

Place the shade on the Socket, tighten the metal ring, and insert the bulb into the socket.

Step 3: Stability Check

Place the light on a level surface to ensure stability.

The JYL1102A is a floor lamp designed for indoor use, featuring a classic and functional design. It requires an ON/OFF Type "A" bulb with a maximum wattage of 40-watts for incandescent bulbs, 13-watts for CFL bulbs, or 9-watts for LED bulbs. An LED 4-watt bulb is included in the box, providing an energy-efficient lighting solution right out of the package. The lamp's dimensions are 12 inches in length, 12 inches in width, and 25 inches in height, making it a suitable size for various spaces without being overly obtrusive.

Function Description:

The primary function of the JYL1102A floor lamp is to provide ambient or task lighting in a room. Its design, comprising a lamp base, body, socket, shade, and bulb, allows for easy assembly and operation. The lamp is activated via an ON/OFF switch, providing straightforward control over the light source. The included LED bulb offers immediate functionality and energy savings. The polarized plug is a key safety feature, designed to reduce the risk of electrical shock by ensuring the plug fits into an outlet only one way. This design prevents incorrect wiring and potential hazards.

Important Technical Specifications:

Model Number: JYL1102A
Product Dimensions: 12"L x 12"W x 25"H
Bulb Type: ON/OFF Type "A"
Maximum Wattage (Incandescent): 40-watts
Maximum Wattage (CFL): 13-watts
Maximum Wattage (LED): 9-watts
Included Bulb: LED 4-watt bulb
Plug Type: Polarized plug (one blade wider than the other)
Assembly Time: Approximately 6 minutes

Usage Features:

The JYL1102A lamp is designed for user-friendly assembly and operation. The assembly process involves three simple steps:

Step 1 (Assembly of Lamp Body and Socket):
- Pull the power cord gently to ensure it's not twisted.
- Screw the lamp body (B) onto the lamp base (A).
- Screw the socket assembly (C) onto the lamp body (B).
- Care should be taken not to twist the power cord during this step, and all connections should be tightened securely.
Step 2 (Shade and Bulb Installation):
- Place the shade (D) onto the socket (C).
- Tighten the metal ring (E) onto the socket (C) to secure the shade.
- Insert the provided bulb (F) into the socket (C).
Step 3 (Stability Check):
- Once assembled, place the lamp on a level surface to ensure it is stable and balanced before use.

Safety Instructions:

Pre-Assembly Check: Before beginning assembly, verify that all parts are present and undamaged. Do not attempt to assemble if any parts are missing or broken.
Assembly Surface: Assemble the lamp on a soft surface to prevent scratching the finish.
Electrical Safety: To minimize the risk of fire, electrical shock, or injury, adhere strictly to the provided guidelines for safe use and installation.
Cord Damage: The external flexible cable or cord of this lamp cannot be replaced. If the cord becomes damaged, the lamp must be destroyed to prevent hazards.
Polarized Plug: The lamp features a polarized plug for safety. This plug will only fit into a polarized outlet one way. If it doesn't fit fully, reverse the plug. If it still doesn't fit, consult a qualified electrician.
Extension Cords: Never use an extension cord unless the lamp's plug can be fully inserted into it. Do not attempt to bypass or disregard this safety feature.

Maintenance Features:

Regular care and maintenance are essential to preserve the lamp's appearance and functionality:

Cleaning Lamps: Always unplug the lamp before using any cleaning solutions.
Dusting Shades: Dust the lamp shades with a feather duster or use an appropriate vacuum-brush attachment to remove dust and debris.
Cleaning Bases: Wipe lamp bases with a soft, dry cloth. Clean lamp bases using methods appropriate for their specific material to avoid damage.
Chemical Avoidance: Avoid using harsh chemicals and household cleaners, as these can damage the finish of the lamp.

Warning:

It is crucial to inspect the item carefully before attempting to install it. If there is any damage or obvious defect, do not install the lamp. Once installed, the item may not be eligible for return. This emphasizes the importance of a thorough pre-installation inspection to ensure product integrity and customer satisfaction.