JONATHAN Y JYL9022A - User Manual

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Model# JYL9022A
Product Dimensions: Ø12 X 22"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to disgard this safety feature.
Part List and Hardware List
1X
PIECE DESCRIPTION PICTURE QUANTITY
C
Body Frame
Tube
B
A
1X
1X
E
Crystal Drop
PIECE DESCRIPTION PICTURE QUANTITY
D
Bulb
Base
2X
52X+1X

Summary

Care and Maintenance

Notice & Important Safety Instructions

Preparation and Assembly

Preparation

Verify all parts are present before assembly. Estimated assembly time is 6 minutes. Use specified bulb types.

Step 1: Base and Tube Assembly

Align parts, insert Tube (B) into Base (C), and attach Body Frame (A) to Tube (B). Tighten securely.

Step 2: Crystal and Bulb Installation

Hang Crystal Drops (E) onto the Body Frame (A) and insert the Bulb (D) into the socket.

Step 3: Stability Check

Place the lamp on a level surface to ensure stability.

JONATHAN Y JYL9022A Specifications

General

Brand	JONATHAN Y
Model	JYL9022A
Category	Light Fixture
Language	English