To Next PageTo Next Page
Need help?Do you have a question about the JONATHAN Y JYL9000A and is the answer not in the manual?
This document outlines the assembly, care, and safety instructions for a portable lamp, emphasizing careful handling and proper installation to ensure longevity and safe operation.
The device is a portable lamp designed to provide illumination. It features a multi-tiered structure with a socket assembly at the top, where bulbs are inserted, and a shade frame adorned with crystal drops to diffuse and enhance the light. The lamp is supported by a series of interconnected tubes that extend from a stable base, allowing it to stand upright as a floor lamp. Its primary function is to offer ambient or task lighting in various indoor settings.
The lamp is designed for straightforward assembly, with an estimated time of 15 minutes. Users are instructed to ensure all parts are present and undamaged before beginning assembly, and to work on a soft surface to prevent scratching the finish. The assembly process involves screwing together the various tube sections, starting from the base and working upwards, culminating in the attachment of the socket assembly and the shade frame with its finial. Care must be taken not to overtighten the connections or twist the power cord during assembly.
For operation, the lamp requires three bulbs, specifically recommending Type "B" bulbs with a maximum wattage of 40-watts for incandescent, 13-watts for CFL, or 9-watts for LED. The package includes three 4W LED bulbs. Once the bulbs are inserted into the sockets, the lamp is ready for use. A key safety feature is its polarized plug, which has one blade wider than the other. This design is intended to reduce the risk of electric shock by ensuring the plug fits into a polarized outlet only one way. If the plug does not fit fully, users are advised to reverse it. If it still doesn't fit, a qualified electrician should be contacted, and the use of an extension cord is only recommended if the plug can be fully inserted into it. Users are explicitly warned not to attempt to bypass this safety feature. After assembly, it is important to place the lamp on a level surface to ensure stability before use.
Maintaining the lamp involves simple, routine care to preserve its appearance and functionality. Before any cleaning, the lamp should be unplugged from the power source to prevent electrical hazards. For dusting the shades, a feather duster or an appropriate vacuum-brush attachment is recommended. The lamp bases should be cleaned with a soft, dry cloth, using cleaning methods suitable for the specific material of the base. It is crucial to avoid the use of harsh chemicals and household cleaners, as these can damage the finish of the lamp.
In terms of structural integrity, the instructions emphasize careful handling during assembly to prevent damage, such as overtightening the lamp body or breaking the base screw. The external flexible cable or cord of the lamp is not replaceable. If the cord becomes damaged, the entire lamp must be destroyed to prevent potential electrical hazards. This highlights the importance of protecting the cord from damage during use and storage. Regular inspection of the item before installation is also advised; if any damage or obvious defect is found, the item should not be installed, as it cannot be returned once installed. This proactive approach to maintenance ensures that the lamp is in optimal condition from the outset, contributing to its longevity and safe operation.
General| Brand | JONATHAN Y |
|---|---|
| Model | JYL9000A |
| Category | Light Fixture |
| Dimmable | Yes |
| Material | Metal |
| Voltage | 120V |
