JONATHAN Y JYL2015A - User Manual

To Next Page

WARNING

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT

BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL IF THERE IS ANY DAMAGE OR

1/2

Model# JYL2015A

Product Dimensions: 14"Lx 8"W x 26"H

CARE AND MAINTENANCE

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wi

e with a soft

cloth and clean lam

bases with the methods a

riate to

INSPECT

ITEM

CAREFULLY

BEFORE

ATTEMPTING

INSTALL

THERE

ANY

DAMAGE

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

* Please make sure that you have all parts indicated before you begin assembly of this item

This item should be assembled on a soft surface to prevent scratching the finish during assembly

vacuum brush

attachment.

Wipe

with

soft,

dry

cloth

and

clean

lamp

bases

with

the

methods

appropriate

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

This

item

should

assembled

soft

surface

prevent

scratching

the

finish

during

assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this luminaire cannot be replaced;

If the cord is damaged, the luminaire shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in

the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension

cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.

PIECE DESCRIPTION PICTURE QUANTIT

Part List and Hardware List

A Lamp base 1X E Harp 1X

B Neck 1X F Shade 1X

C Saddle 1X G Finial 1X

Skt

Blb

D Socket 1X H Bulb 1X

1/2

Need help?

Do you have a question about the JONATHAN Y JYL2015A and is the answer not in the manual?

Summary

Installation Safety and Warnings

Electrical Installation Recommendation

Fixture installation should be performed by a licensed electrician. Switch off main electrical supply before installation.

Pre-Installation Inspection

Inspect the item carefully for damage or defects before installation. Do not install if damaged. Installed items may not be returned.

Care and Maintenance Guidelines

Cleaning Procedures

Unplug before cleaning. Dust shades with a feather duster or vacuum brush. Wipe lamp bases with appropriate methods.

Chemicals and Cleaners Warning

Avoid using chemicals and household cleaners, as they may damage the fixture's finish.

Important Safety Instructions

Assembly Preparation

Ensure all parts are present before assembly. Assemble on a soft surface to prevent scratching the finish.

Cord Safety

The external flexible cable cannot be replaced. If the cord is damaged, the luminaire shall be destroyed.

Polarized Plug Safety

This lamp has a polarized plug for shock risk reduction. It fits a polarized outlet one way. Do not use extension cords.

Product Details and Parts

Model and Dimensions

Model JYL2015A. Product Dimensions: 14"Lx 8"W x 26"H.

Part List

Lists components A-H including Lamp base, Neck, Saddle, Socket, Harp, Shade, Finial, and Bulb.

Assembly Instructions

Preparation and Bulb Type

Verify all parts are present before assembly. Use Type 'A' bulb max 100W, CFL max 23W, or LED max 12W.

Step 1: Base and Neck Assembly

Connect Neck (B) to Base (A) and screw securely. Avoid twisting the power cord during assembly.

Step 2: Harp, Shade, and Bulb Installation

Insert Harp (E) into Saddle (C), place Shade (F) on Harp, tighten Finial (G), and insert Bulb (H) into socket (D).

Step 3: Stability Check

Place the assembled light on a level surface to confirm it is stable.

Summary

Installation Safety and Warnings

Electrical Installation Recommendation

Fixture installation should be performed by a licensed electrician. Switch off main electrical supply before installation.

Pre-Installation Inspection

Inspect the item carefully for damage or defects before installation. Do not install if damaged. Installed items may not be returned.

Care and Maintenance Guidelines

Cleaning Procedures

Unplug before cleaning. Dust shades with a feather duster or vacuum brush. Wipe lamp bases with appropriate methods.

Chemicals and Cleaners Warning

Avoid using chemicals and household cleaners, as they may damage the fixture's finish.

Important Safety Instructions

Assembly Preparation

Ensure all parts are present before assembly. Assemble on a soft surface to prevent scratching the finish.

Cord Safety

The external flexible cable cannot be replaced. If the cord is damaged, the luminaire shall be destroyed.

Polarized Plug Safety

This lamp has a polarized plug for shock risk reduction. It fits a polarized outlet one way. Do not use extension cords.

Product Details and Parts

Model and Dimensions

Model JYL2015A. Product Dimensions: 14"Lx 8"W x 26"H.

Part List

Lists components A-H including Lamp base, Neck, Saddle, Socket, Harp, Shade, Finial, and Bulb.

Assembly Instructions

Preparation and Bulb Type

Verify all parts are present before assembly. Use Type 'A' bulb max 100W, CFL max 23W, or LED max 12W.

Step 1: Base and Neck Assembly

Connect Neck (B) to Base (A) and screw securely. Avoid twisting the power cord during assembly.

Step 2: Harp, Shade, and Bulb Installation

Insert Harp (E) into Saddle (C), place Shade (F) on Harp, tighten Finial (G), and insert Bulb (H) into socket (D).

Step 3: Stability Check

Place the assembled light on a level surface to confirm it is stable.

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features
Important Safety Instructions and Warnings

This document provides comprehensive instructions for the assembly, use, and maintenance of the JONATHAN Y Model# JYL2015A table lamp. It includes a detailed parts list, hardware list, and step-by-step assembly guide, along with important safety warnings and care recommendations.

Function Description:

The JYL2015A is a portable table lamp designed to provide illumination. It features a polarized plug as a safety feature to reduce the risk of electric shock. The lamp is intended for indoor use and requires a specific type and wattage of bulb for optimal and safe operation.

Important Technical Specifications:

Model Number: JYL2015A
Product Dimensions: 14"L x 8"W x 26"H
Bulb Type (Recommended): ON/OFF Type "A"
Maximum Incandescent Bulb Wattage: 100-WATT
Maximum CFL Bulb Wattage: 23-WATT
Maximum LED Bulb Wattage: 12-WATT
Included Bulb: LED 9-WATT bulb is provided in the box.
Electrical Safety: Features a polarized plug (one blade wider than the other) to reduce the risk of electric shock.
Assembly Time: Estimated 6 minutes.

Usage Features:

Assembly: The lamp requires simple assembly, which involves connecting the neck to the base, inserting the harp into the saddle, placing the shade on the harp, tightening the finial, and inserting the bulb into the socket.
Bulb Installation: Users must insert the provided 9-watt LED bulb or a compatible bulb (Type "A" up to 100W incandescent, 23W CFL, or 12W LED) into the socket.
Power Connection: The lamp connects to a standard polarized electrical outlet. Users are advised to ensure the plug fits fully into the outlet; if not, they should reverse the plug. If it still doesn't fit, a qualified electrician should be contacted. Extension cords should only be used if the plug can be fully inserted.
Stability Check: After assembly, the lamp should be placed on a level surface to ensure stability before use.

Maintenance Features:

Cleaning:
- Always unplug the lamp before cleaning.
- Dust shades with a feather duster or an appropriate vacuum-brush attachment.
- Wipe lamp bases with a soft, dry cloth.
- Avoid using chemicals and household cleaners, as they may damage the finish.
Cord Replacement: The external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the luminaire must be destroyed.
Pre-Installation Inspection: Users are instructed to inspect the item carefully before attempting to install it. If there is any damage or obvious defect, the item should not be installed and cannot be returned once installed.

Important Safety Instructions and Warnings:

Professional Installation Recommended: Installation of this lighting fixture is recommended to be done by a licensed electrician.
Power Disconnection: Always switch off the main electrical supply from the main fuse box/circuit breaker before installation.
Assembly Surface: Assemble the item on a soft surface to prevent scratching the finish.
Cord Handling: Be careful not to twist the power cord during assembly and tighten connections securely.
Fire/Shock/Injury Prevention: Follow all guidelines for safe use and installation to reduce the risk of fire, electrical shock, or injury to persons or property.
Polarized Plug: Do not attempt to defeat the safety feature of the polarized plug.
Damaged Cord: If the cord is damaged, the luminaire must be destroyed.
Missing/Damaged Parts: If any part is missing or damaged, do not attempt to assemble the product.
Chemicals: Avoid using chemicals and household cleaners on the lamp base, as they may damage the finish.