JONATHAN Y JYL2075A User Manual

WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Model# JYL2075A
Product Dimensions: 16"Lx 16"W x 32"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A.B.C.D Lamp base 1X E Harp 1X
B Neck 1X F Shade 1X
C Saddle 1X G Finial 1X
D Socket 1X H Bulb 1X

JONATHAN Y JYL2075A Specifications

General

Brand	JONATHAN Y
Model	JYL2075A
Category	Home Lighting
Language	English

Summary

Care and Maintenance

Important Safety Instructions

Pre-Assembly Checks and Guidelines

Verify all parts, assemble on a soft surface, and follow safety guidelines for use and installation.

Power Cord Safety

The external flexible cord cannot be replaced; if damaged, the lamp must be destroyed.

Polarized Plug Safety Feature

Polarized plug reduces shock risk and fits outlets one way; avoid extension cords if plug does not fully insert.

Part List

Preparation and Bulb Usage

Recommended Bulb Types

Use Type 'A' bulb max 100W, CFL max 23W, or LED max 12W. A 9W LED bulb is included.

Assembly Steps

Step 1: Connect Neck to Base

Connect and screw the Neck (B) onto the Lamp Base (A), securing the power cord carefully.

Step 2: Attach Shade and Finial

Insert Harp (E) into Saddle (C), attach Shade (F), tighten Finial (G), and insert bulb (H).

Step 3: Final Stability Check

Place the assembled lamp on a level surface to confirm stability.