JONATHAN Y JYL5036A User Manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE
QUANTITY
A Lamp base 1X E Shade 1X
B Saddle 1X F Finial 1X
C Socket 1X G Bulb 1X
D Harp 1X
Model# JYL5036A
Product Dimensions: 14"L X 14"W X 25"H
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS

JONATHAN Y JYL5036A Specifications

General

Model Number	JYL5036A
Brand	JONATHAN Y
Finish	Black
Style	Modern
Bulb Type	LED
Number of Bulbs	1
Specific Uses	Outdoor
Shade Material	Glass
Light Direction	Downlight
Power Source	Hardwired
Voltage	120V

Summary

General Safety Information

Pre-Installation Inspection

Inspect item carefully before installation. Do not install if damaged or defective. No returns after installation.

Cleaning and Maintenance

Unplug before cleaning. Dust with feather duster or vacuum brush. Wipe bases with soft, dry cloth. Avoid chemicals.

Key Safety Instructions

Ensure all parts are present. Assemble on soft surface. Polarized plug reduces shock risk. Contact electrician if plug doesn't fit.

Assembly Steps

Step 1: Harp and Shade Assembly

Insert the Harp into the Saddle. Put the shade on the Harp, then tighten the Finial into the Harp.

Step 2: Bulb Installation

Insert the bulb into the socket.

Step 3: Stability Check

Place the light on a level surface to check if everything is stable.