JONATHAN Y JYL5014A - User Manual

To Next Page

Model# JYL5014A

Product Dimensions: 16"Lx 16"W x 28.5"H

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this luminaire cannot be replaced;

If the cord is damaged, the luminaire shall be destroyed

WARNING

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT

BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

PIECE DESCRIPTION PICTURE QUANTIT

PIECE DESCRIPTION PICTURE QUANTITY

A Lamp base 1X E Harp 1X

B Neck 1X F Shade 1X

C Saddle 1X G Finial 1X

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in

the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension

cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.

Part List and Hardware List

D Socket 1X H Bulb 1X

Need help?

Do you have a question about the JONATHAN Y JYL5014A and is the answer not in the manual?

Summary

Product Safety and Handling

Installation and Electrical Safety

Important warnings for safe installation, emphasizing licensed electrician use and power disconnection.

Care and Maintenance Instructions

Guidelines for cleaning the lamp base and shade using appropriate methods to avoid finish damage.

Assembly and Usage Safety Precautions

Key safety instructions for assembly, cord handling, and polarized plug features to prevent shock or injury.

Product Assembly Steps

Preparation and Bulb Information

Ensure all parts are present before assembly and use specified bulb types for optimal performance.

Step 1: Connecting Neck to Base

Instructions for connecting the lamp neck to the base, cautioning against twisting the power cord.

Step 2: Attaching Harp, Shade, and Bulb

Guide to assembling the harp, shade, finial, and inserting the bulb into the socket.

Step 3: Stability Check

Final step to place the lamp on a level surface and check for stability.

Summary

Product Safety and Handling

Installation and Electrical Safety

Important warnings for safe installation, emphasizing licensed electrician use and power disconnection.

Care and Maintenance Instructions

Guidelines for cleaning the lamp base and shade using appropriate methods to avoid finish damage.

Assembly and Usage Safety Precautions

Key safety instructions for assembly, cord handling, and polarized plug features to prevent shock or injury.

Product Assembly Steps

Preparation and Bulb Information

Ensure all parts are present before assembly and use specified bulb types for optimal performance.

Step 1: Connecting Neck to Base

Instructions for connecting the lamp neck to the base, cautioning against twisting the power cord.

Step 2: Attaching Harp, Shade, and Bulb

Guide to assembling the harp, shade, finial, and inserting the bulb into the socket.

Step 3: Stability Check

Final step to place the lamp on a level surface and check for stability.

This document provides instructions for the assembly, use, and maintenance of the JONATHAN Y Model# JYL5014A portable lamp.

Function Description:

The JYL5014A is a portable electric lamp designed to provide illumination. It features a traditional design with a lamp base, neck, saddle, socket, harp, shade, finial, and a replaceable bulb. The lamp is intended for indoor use and requires assembly before operation. It operates by converting electrical energy into light, controlled by an on/off switch.

Important Technical Specifications:

Model Number: JYL5014A
Product Dimensions: 16"L x 16"W x 28.5"H
Bulb Type Compatibility:
- ON/OFF Type "A" bulb: Maximum 100-watt
- CFL bulb: Maximum 23-watt
- LED bulb: Maximum 12-watt
Included Bulb: The lamp comes with a 9-watt LED bulb.
Plug Type: Polarized plug (one blade wider than the other) for safety, designed to reduce the risk of electric shock.
Electrical Safety: Requires installation by a licensed electrician. Users must switch off the main electrical supply from the fuse box/circuit breaker before installation.

Usage Features:

Assembly: The lamp requires simple assembly, estimated to take 6 minutes. Key steps include connecting the neck to the lamp base, inserting the harp into the saddle, placing the shade on the harp, tightening the finial, and inserting the bulb into the socket.
Polarized Plug: The polarized plug is a safety feature. If the plug does not fit fully into an outlet, it should be reversed. If it still does not fit, a qualified electrician should be contacted. Extension cords should only be used if the plug can be fully inserted into the extension cord. Users are warned not to attempt to defeat this safety feature.
Bulb Installation: The lamp is designed to accommodate various bulb types within specified wattage limits. The included 9-watt LED bulb is energy-efficient.
Stability Check: After assembly, users are instructed to place the lamp on a level surface to ensure stability before use.
Power Cord Management: During assembly, users are advised to be careful not to twist the power cord and to tighten connections securely.

Maintenance Features:

Cleaning:
- Lamps should be unplugged before using any cleaning solutions.
- Shades can be dusted with a feather duster or an appropriate vacuum-brush attachment.
- Lamp bases should be wiped with a soft, dry cloth.
- Cleaning methods should be appropriate to the material of the lamp base.
- Users are warned to avoid the use of chemicals and household cleaners as they may damage the finish.
Cord Damage: The external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the luminaire must be destroyed to prevent safety hazards.
Pre-Installation Inspection: Users are instructed to inspect the item carefully before attempting to install it. If there is any damage or obvious defect, the item should not be installed and cannot be returned once installed.
Assembly Surface: Assembly should be performed on a soft surface to prevent scratching the finish.

Parts List:

The lamp consists of the following components:

A: Lamp base (1X)
B: Neck (1X)
C: Saddle (1X)
D: Socket (1X)
E: Harp (1X)
F: Shade (1X)
G: Finial (1X)
H: Bulb (1X)

Safety Instructions:

Installation by a licensed electrician is recommended.
Always switch off the main electrical supply from the fuse box/circuit breaker before installation.
Do not install if the item is damaged or defective.
Follow guidelines for safe use and installation to reduce the risk of fire, electrical shock, or injury.
Do not attempt to repair a damaged cord; destroy the luminaire instead.
Do not defeat the safety feature of the polarized plug.