JONATHAN Y JYL5044A User Manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE
QUANTITY
A Lamp base 1X E Shade 1X
B Saddle 1X F Finial 1X
C Socket 1X G Bulb 1X
D Harp 1X
Model# JYL5044A
Product Dimensions: 13"L X 13"W X 21"H
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS

JONATHAN Y JYL5044A Specifications

General

Product Type	Outdoor Light
Model Number	JYL5044A
Brand	JONATHAN Y
Material	Metal
Color	Black
Style	Modern
Light Source	LED
Voltage	120V
Wattage	9W
Color Temperature	3000K
IP Rating	IP65
Number of Lights	1
Shade Material	Glass
Power Source	Hardwired
Bulb Type	Integrated LED
Specific Uses	Outdoor
Fixture Features	Weather Resistant

Summary

Product Warning Information

Lamp Care and Maintenance

Important Safety Instructions

Pre-Assembly Checks

Verify all parts are present before commencing assembly to prevent damage or injury.

Assembly Surface Recommendation

Assemble the item on a soft surface to avoid scratching the finish during the process.

Electrical Safety Guidelines

Follow guidelines to reduce fire, shock, or injury risks; cord damage means lamp destruction.

Polarized Plug Usage

Use polarized plug correctly in outlet; do not use extension cords unless plug fits fully.

Product Preparation and Assembly

Pre-Assembly Verification

Ensure all parts are present and undamaged before starting assembly.

Bulb Specification

Use specific bulb types and wattages: MAX 100W 'A' or CFL MAX 23W or LED MAX 12W.

Step 1: Harp, Shade, and Finial Assembly

Insert Harp into Saddle, place Shade on Harp, and tighten Finial onto Harp.

Step 2: Bulb Installation

Insert the bulb into the socket.

Step 3: Stability Check

Place the assembled lamp on a level surface to ensure stability.