To Next PageTo Next Page
Need help?Do you have a question about the JONATHAN Y JYL6130A and is the answer not in the manual?
Inspect item for damage before installation; do not install if defective. Item may not be returned once installed.
Follow assembly tips, safety guidelines, and polarized plug instructions to prevent fire, shock, or injury.
Unplug lamps before cleaning; use feather duster or vacuum for shades, soft dry cloth for bases. Avoid chemicals.
Verify all parts against contents list before assembly; do not assemble if parts are missing or damaged.
Detailed instructions for connecting lamp body sections, base, shade, bulb, and tightening hardware.
Inspect item for damage before installation; do not install if defective. Item may not be returned once installed.
Follow assembly tips, safety guidelines, and polarized plug instructions to prevent fire, shock, or injury.
Unplug lamps before cleaning; use feather duster or vacuum for shades, soft dry cloth for bases. Avoid chemicals.
Verify all parts against contents list before assembly; do not assemble if parts are missing or damaged.
Detailed instructions for connecting lamp body sections, base, shade, bulb, and tightening hardware.
This document provides instructions for the assembly, use, and maintenance of the JONATHAN Y Model# JYL6130A floor lamp.
The JYL6130A is a portable floor lamp designed to provide illumination. It utilizes a polarized plug as a safety feature to reduce the risk of electric shock, ensuring it fits into a polarized outlet only one way. The lamp is designed to be assembled by connecting several lamp body sections, attaching a lamp base, securing a shade, and inserting a bulb. It is intended for indoor use and provides a light source for various settings.
The lamp is designed for straightforward assembly, with an estimated assembly time of 15 minutes. Users are instructed to ensure all parts are present before beginning and to assemble the item on a soft surface to prevent scratching. The assembly process involves screwing together multiple sections of the lamp body (A1 through A5), placing the lamp base (D) onto the lowest lamp body section (A5), and securing it with a tooth washer (E) and a hexagon nut (F), tightened with a wrench (H). Following this, the lamp shade (B) is placed into the top lamp body section (A) and locked into place with a ring (C). Finally, the provided LED 9-watt bulb (G) is inserted into the socket.
For safe operation, the lamp requires a specific type of bulb: an ON/OFF Type "A" bulb with a maximum of 40 watts, a CFL bulb with a maximum of 13 watts, or an LED bulb with a maximum of 9 watts. A 9-watt LED bulb is included in the box. Users are cautioned to ensure the polarized plug is fully inserted into a polarized outlet. If the plug does not fit, it should be reversed. If it still does not fit, a qualified electrician should be contacted. The use of an extension cord is only recommended if the plug can be fully inserted into it. Disregarding this safety feature is strongly advised against.
The lamp's external flexible cable or cord cannot be replaced; if it becomes damaged, the lamp must be destroyed to prevent hazards. After assembly, users should place the lamp on a level surface to check for stability before use.
To ensure the longevity and appearance of the lamp, specific care and maintenance guidelines are provided. Before cleaning, the lamp should always be unplugged. The shades can be dusted using a feather duster or an appropriate vacuum-brush attachment. The lamp bases should be cleaned with a soft, dry cloth and methods appropriate to the material of the base. It is crucial to avoid the use of chemicals and household cleaners, as these can damage the finish of the lamp.
Users are also advised to inspect the item carefully before attempting to install it. If any damage or obvious defect is found, the item should not be installed. Once installed, the item may not be returned. This emphasizes the importance of initial inspection for any manufacturing or shipping defects. The document also highlights that the item may not be returned once it has been installed, reinforcing the need for a thorough pre-installation check.
General| Product Type | Table Lamp |
|---|---|
| Base Material | Metal |
| Shade Material | Fabric |
| Shade Color | White |
| Bulb Type | LED |
| Bulb Included | Yes |
| Material | Metal, Fabric |
| Number of Lights | 1 |
| Height | 24 inches |
| Width | 12 inches |
| Voltage | 120V |
| Wattage | 60W |
| Dimmable | No |
| Installation Type | Plug-In |
| Certification | UL Listed |
| Switch Type | On/Off Switch |
