JONATHAN Y JYL6112A User Manual

WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Model# JYL6112A
Product Dimensions: 10"Lx7"Wx 18"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an
extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp body 1X B Bulb 1X
1/2

JONATHAN Y JYL6112A Specifications

General

Brand	JONATHAN Y
Model	JYL6112A
Style	Modern
Base Material	Metal
Bulb Base	E26

Summary

Important Warnings and Safety Instructions

Pre-Installation Inspection

Inspect item carefully before installation; do not install if damaged or defective. Item cannot be returned once installed.

Care and Maintenance Guidelines

Unplug before cleaning. Dust shades with feather duster. Wipe bases with a soft, dry cloth. Avoid chemicals.

Assembly and Safety Precautions

Ensure all parts are present. Assemble on a soft surface. Follow guidelines to reduce risk of fire, shock, or injury.

Cord and Plug Safety

Lamp cord is not replaceable. Damaged cord means lamp destruction. Use polarized plug correctly; never with extension cords.

Product Preparation and Assembly

Pre-Assembly Checks

Verify all parts against package contents before assembly. Do not assemble if parts are missing or damaged.

Bulb Specification

Use ON/OFF type 'A' bulb max 40W, CFL max 13W, or LED max 9W. An LED 9-watt bulb is included.

Step 1: Install Bulb

Insert the bulb (B) into the socket.

Step 2: Stability Check

Place the light on a level surface to ensure it is stable.