JONATHAN Y JYL6205A User Manual

WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Model# JYL6205A
Product Dimensions: 14"Lx 14"W x 26"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X E Harp 1X
B Neck 1X F Shade 1X
C Saddle 1X G Finial 1X
D Socket 1X H Bulb 1X
-4105/2

JONATHAN Y JYL6205A Specifications

General

Brand	JONATHAN Y
Model	JYL6205A
Category	Home Lighting
Language	English

Summary

Warning

Care and Maintenance

Notice and Important Safety Instructions

External Flexible Cable Safety

The external flexible cable or cord of this lamp cannot be replaced; if damaged, the lamp shall be destroyed.

Polarized Plug Safety Feature

This portable lamp has a polarized plug to reduce electric shock risk; it fits only one way in a polarized outlet.

Preparation and Assembly

Bulb Type and Wattage Recommendation

Use ON/OFF Type 'A' bulb max 100W, CFL max 23W, or LED max 12W. An LED 9W bulb is included.

Step 1: Connect Neck to Base

Pull power cord to connect Neck (B) to Base (A) and screw Neck onto Base. Tighten securely without twisting the cord.

Step 2: Assemble Harp, Shade, and Bulb

Insert Harp (E) into Saddle (C), attach Shade (F) to Harp, tighten Finial (G), and insert Bulb (H) into Socket (D).

Step 3: Final Stability Check

Place the lamp on a level surface to check if everything is stable and secure.