JONATHAN Y JYL6208B User Manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE QUANTITY
A.B.C.D Lamp base 1X E Harp 1X
B Neck 1X F Shade 1X
C Saddle 1X G Finial 1X
D Socket 1X H Bulb 1X
Model# JYL6208A. JYL6208B
Product Dimensions: 15"Lx 15"W x 27.5"H
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the
outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord
unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS

JONATHAN Y JYL6208B Specifications

General

Brand	JONATHAN Y
Model	JYL6208B
Category	Home Lighting
Type	Table Lamp
Material	Metal
Base Material	Metal
Finish	Brushed Nickel
Color	Silver
Base Color	Silver
Shade Color	White
Bulb Type	LED
Bulb Included	Yes
Number of Lights	1
Voltage	120V
Wattage	9W
Switch Type	3-Way
Width	14 inches
Length	14 inches

Summary

Important Safety Warnings

Pre-Installation Inspection

Inspect item carefully for damage or defects before installation. Do not install if damaged; item cannot be returned once installed.

Care and Maintenance Instructions

Cleaning Procedures

Unplug lamps for cleaning. Use feather duster or vacuum for shades. Wipe bases with soft, dry cloth. Avoid chemicals.

Important Safety Instructions

Part Verification

Ensure all indicated parts are present before beginning assembly of the item.

Assembly Surface Protection

Assemble the item on a soft surface to prevent scratching the finish during assembly.

General Safety Guidelines

Follow guidelines for safe use and installation to reduce risk of fire, shock, or injury.

Cord Safety and Replacement

The external flexible cable or cord cannot be replaced. If damaged, the lamp must be destroyed.

Polarized Plug Safety Feature

Polarized plug fits one way for shock reduction. Reverse if needed. Never use with an extension cord unless fully inserted.

Assembly Preparation

Part Check and Preparation

Before assembly, ensure all parts are present. Compare with package contents list and hardware list.

Bulb Usage Guidelines

Use specified bulb types: Type 'A' MAX 100W, CFL MAX 23W, or LED MAX 12W. LED 9-watt bulb is included.

Assembly Steps

Step 1: Connect Neck to Base

Pull power cord to connect Neck (B) to Base (A). Screw Neck (B) onto Lamp base (A) securely.

Step 2: Attach Harp, Shade, and Finial

Insert Harp (E) into Saddle (C). Put shade (F) on Harp (E), then tighten Finial (G) into Harp (E).

Step 3: Install Bulb and Final Check

Insert bulb (H) into socket (D). Place light on a level surface to check stability.