JONATHAN Y JYL8000A User Manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X E Screw 3X
B Lamp Body 3X F Bulb 1X
C Socket 1X G CUP 1X
D Shade 1X
WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
Model# JYL8000A
Product Dimensions: 15"L X 15"W X 70.5"H
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an
extension cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List

JONATHAN Y JYL8000A Specifications

General

Brand	JONATHAN Y
Model	JYL8000A
Category	Home Lighting
Language	English

Summary

General Warnings and Installation Precautions

Electrical Safety Warning

Switch off the main electrical supply from the main fuse box/circuit breaker before installation.

Inspection and Return Policy

Inspect the item carefully before installation. Do not install if damaged. Item may not be returned once installed.

Care and Maintenance Instructions

Cleaning Procedures

Unplug lamps before cleaning. Use feather duster or vacuum for shades. Wipe with soft, dry cloth for bases.

Important Safety Instructions

Pre-Assembly Checks and Surface Protection

Ensure all parts are present before assembly. Assemble on a soft surface to prevent scratching.

Guidelines for Safe Use and Installation

Follow guidelines to reduce risk of fire, electrical shock, or injury.

Cord Replacement and Damage Policy

The external flexible cable cannot be replaced; if damaged, the luminaire shall be destroyed.

Polarized Plug Safety Feature

Lamp has a polarized plug for shock reduction. Fits outlet one way. Contact electrician if plug doesn't fit.

Preparation and Assembly

Parts Verification and Assembly Time

Ensure all parts are present. Estimated assembly time is 6 minutes.

Bulb Specifications and Inclusion

Use specified bulb types (max 100W incandescent, 23W CFL, 12W LED). An LED 9W bulb is included.

Assembly Steps

Step 1: Aligning Parts and Base Assembly

Align parts, screw Cup(G) onto Lampbody, assemble lamp body sections, and attach to lamp base.

Step 2: Attaching Shade and Bulb

Insert shade(D) into Cup(G), secure with screws(E). Insert bulb(F) into socket(C).

Step 3: Final Stability Check

Place the light on a level surface to check if everything is stable.